News

Home > News > Content

Technical Points Of Wood Laser Engrave

Shenzhen MG Technology Co.,Ltd | Updated: May 19, 2016

1. Natural wood (untreated wood)

Wood is by far the most commonly used laser processing materials, it is easy to carve and cut. Light wood like birch, cherry or maple well by laser vaporization, which is suitable for carving. Each wood has its own characteristics, some dense, such as hardwood, in the engraving or cutting when it is to use a greater laser power. We suggest that the wood is not familiar with the wood before, to first study the characteristics of its engraving.

2. Plywood

Sometimes customers may ask you to carve on the plywood, in fact, this is not a big difference in the wood carving, but a little to pay attention to, the depth of the engraving can not be too deep. After cutting edge will be glued back like timber blackening, if the key to see what kind of plywood is made of wood.

3. Wood cutting

Laser engraving machine cutting the depth of the wood is generally not deep within 5mm, this is because the laser power is small, such as the slow speed cutting will cause the burning of wood. The specific operation can be used to try to use a large size lenses, and the use of repeated cutting method.

4. Coloring

Wood carving will tend to have a feeling of burning, with wood color to match with a primitive beauty of art, the color depth mainly depends on the laser power and the speed of engraving. But some wood is usually a soft kind, no matter how you can change its color (such as birch). Sometimes the customer may ask you to color the finished product.


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

TEL:   E-mail: moffe06@hotmail.com

Copyright © Shenzhen MG Technology Co.,Ltd All rights reserved.