Ezcad Laser Marking Software

Ezcad Laser Marking Software

Shenzhen MG Technology Co.,Ltd is one of the leading China ezcad laser marking software manufacturers and suppliers, equipped with professional factory we are always able to produce low price ezcad laser marking software, laser diode controller, laser marking software, ezcad laser, laser ez cad...

  Product Details

Shenzhen MG Technology Co.,Ltd is one of the leading China ezcad laser marking software manufacturers and suppliers, equipped with professional factory we are always able to produce low price ezcad laser marking software, laser diode controller, laser marking software, ezcad laser, laser ez cad with reliable quality.


  


  

  

Introduction

USBLMC marking control board is developed specially for laser marking machine, which exchange data with PC through USB interface. According to the different laser modules, several model of the USBLMC have been designed.

Features

1.Use 68-pins SCSI 3 socket, connect SPI G3 laser module via 68-pin cable directly.

2.Output digital signals for digital scanhead.

3.Supports Mark-on-fly function with an encoder connected.

4.Support multi-board mode. Up to 8 boards can be controlled by one computer. The 8 boards can process different jobs (The function needs special software).

5.Two axes for step/servo motor are available.

6.12 routes of input(TTL compliant).In0,In4-In13, XORG0(IN14),YORG0(IN15).

7.8 routes of output(TTL compliant).Out0-7 output from CON5 ,and out4-7 could be OC.

8.Remark function: this function is used to remark what ever is in the memory of the board, especially convenient for high speed marking of a same pattern.

9.Compatible with USB2.0 specifications.

DB15 Galvo output

Galvo signal is digital signal, which can be directly connected to digital scanhead. Please confirmed that the transfer protocols is matched when using digital scanhead for there are different protocols. In order to connect analog scanhead, the transfer board is required to convert the digital signal to analog signal.

68 PINS SCSI 3, Laser control

Socket CON2 can be directly connected to the 68 pins socket on SPI G3 fiber laser

module via a 68 pins cable.

  

  

More Info send email to get user manual!

More Spare Parts to buy:

Laser diode modules, Laser power supply, Q Switch, Q switch driver, Scanner, F-Theta lens, LMC Control card, Rotary, 2D Table, 3D Table, etc.


Related Products

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

TEL:   E-mail: moffe06@hotmail.com

Copyright © Shenzhen MG Technology Co.,Ltd All rights reserved.